For the Ring Doorbell’s optimal working, it has to be positioned correctly and at a certain angle. It also depends on the ring doorbell version you have at your home, which will decide the proper placement of it in your home.
The Ring doorbell should be mounted approximately 48 inches or 1.2 meters from the ground. You must also ensure that the doorbell is mounted flat against the door or a wall.
Still, you can also use the additional kits for adjusting the Ring Doorbell vertically or horizontally. If you are thinking of installing a new doorbell at your place, you will need a guide for proper installation.
Here are some of the most important steps you will need to follow to install the ring doorbell properly.
How Should You Position Your Ring Doorbell?
Many factors affect the positioning of the Ring Doorbell, but the main factors are:
- Ring Doorbell height from the ground
- Mounting angle of your Ring Doorbell
- Ring Doorbell Power source
These are some of the essential factors that will ensure that your doorbell works in good condition. So, why each of these factors is necessary for the proper working of your doorbell?
Let’s understand this in detail!
Ring Doorbell Height (How high should a Ring doorbell be?)
So you must be wondering, how high to install ring doorbell? The optimal height at which the doorbell must be mounted is precisely about 4 feet above the ground, which is 48 inches or 1.2 meters above the ground.
You will have to place your doorbell at this height no matter where you have decided to mount it, which could be a door frame, the outer wall of your house, or the door
The ring doorbell placement is necessary because the motion sensors in your doorbell must not detect movements far from you and give you false alarms. (Use this guide if your Ring Doorbell is not detecting motion)
The height mentioned is necessary to allow the motion sensors to detect the person near the door and not the activities that happen far from the door.
If placed correctly, the motion sensors will detect motion from five feet away and have a horizontal range of up to 160 degrees.
Additionally, your doorbell’s camera will have a much more extensive vertical range of view than the motion sensors, and you will be able to see the face of the person approaching your door
Mounting Angle of Your Doorbell
Adjusting the angle becomes a necessity for a clear view and the better working of the motion sensors. However, there are various installation kits available that can help you set up just the right angle or alter the angle, which results in the better working of your Ring Doorbell.
The Corner Kit available in the market allows the users to adjust 15 to 55 degrees of your doorbell’s horizontal angle.
In contrast, the Wedge Kit allows the user to move vertically and adjust the Ring Doorbell up or down by 15 degrees.
The doorbell versions such as the Doorbell Pro and the Doorbell 2 already have corner and wedge kits for easier installations and adjustments.
These kits are entirely helpful if you have hard-wired your doorbell as you can easily position a hard-wired doorbell. The perfect angle is a necessity to avoid motion sensors from detecting unwanted objects.
Ring Doorbell Power Source
If you bought the Ring Doorbell Pro then it should be hard wired to your home’s existing wires for the doorbell. This can lower your chances of positioning your doorbell properly, which is why you should go for Doorbell 2 or a battery-operated Ring Doorbell.
Buying either of these doorbells gives you the freedom to install it anywhere you wish to install – right from the door frames’ to the outer walls.
There is a necessity to think about your ring doorbell’s power source because even that would decide the type of doorbell you need and where you can place it for its optimal working.
Ring Doorbell Height With Steps
The height at which a Ring doorbell must be mounted is 48 inches or 1.2 metres from the ground which is measured from the ground to the camera lens. So, when you mount your Ring doorbell on a home with steps, the sensors may get in problem.
The Ring camera offers an extensive field of vision, capturing a wide range both vertically and horizontally. Even if you have steps, the camera will still provide excellent visibility.
However, keep in mind that the sensors’ field of vision is limited to a horizontal range of 155-180 degrees and an outward distance of 5-30 feet from the device.
When placing a Ring Doorbell on a house with steps, it’s important to consider both the number of steps and the angle of the stairs.
By positioning the device correctly, it ensures that the Ring is placed further away from passers-by while maintaining a suitable angle. This not only enhances security but also improves the overall functionality of the device.
When there are just one or two steps, I usually mount the Ring flush and level. However, if there are more steps or if they happen to be at a steep angle, I usually pitch the Ring downward slightly.
To ensure the Ring is mounted at the correct angle, simply walk by and check your phone. If it detects the desired area, you’re good to go! If not, make adjustments for optimal performance.
With steps, it is recommended to mount the Ring at a height of 48 inches above the floor. However, instead of measuring from the ground level, it’s important to measure from the platform when standing in front of the door.
How To Find The Right Position For Your Ring Doorbell?
1. Consider Your Power Source
When setting up your Ring doorbell, take into account the power source.
For wireless doorbells, you have the flexibility to install it anywhere with a strong Wi-Fi connection.
However, if you have a hardwired Ring Doorbell model, make sure to check the wiring requirements to find the perfect spot. This will ensure a smooth installation process and optimal performance for your Ring device.
2. Use The Right Positioning Height
Once you’ve narrowed down the options for powe source, grab a measuring tape and find the perfect height – 48 inches above the ground.
All Ring doorbell models need to be placed at this height and this ensures optimal functionality for the camera and sensors.
3. Find The Correct Mounting Angle
It is recommended to use a flat surface to install your Ring doorbell. However, if that is not feasible, you can use the wedge and corner kits to mount the device at the front of your house.
The choice of kit depends on your specific mounting needs.
4. Test Your Ring Doorbell’s Position
After finishing the setup of your device, it’s time to test the position of your Ring device.
Simply launch the Ring app and check the view of your main camera. To further ensure the functionality, arm your Ring Doorbell and see if the sensors detect your motion.
Why Is Ring Doorbell Placement So Important?
Proper placement of your Ring Doorbell is crucial for optimal functionality.
There are two primary ways in which Ring Doorbell models detect motion.
Firstly, the camera offers a wide view of the surrounding environment.
Secondly, Passive Infrared (PIR) sensors use heat sensors to identify motion within the detection area.
To ensure clear visibility of people’s faces, it is important to mount your Ring Doorbell at an appropriate height.
Avoid mounting it too high as it may obstruct the camera’s field of view. Moreover, incorrect placement may lead the PIR sensor to detect the heat from passing vehicles instead of detecting incoming visitors. This can impact the device’s overall performance.
By finding the right placement, you can maximize the effectiveness of your Ring Doorbell and enhance your smart security system.
What Happens If A Ring Doorbell Isn’t Properly Positioned?
If you Ring doorbell is not properly positioned, you can face following risks:
Audio Quality: The position of your Ring Doorbell plays a crucial role in capturing clear audio. Avoid installing it in areas surrounded by walls or obstacles, as this may hinder communication with visitors using the Live View and Two-Way Talk features.
Battery Drain: Incorrect positioning of your Ring Doorbell can lead to faster battery drain. Beware of PIR sensors detecting passing cars, as they can significantly impact battery life. Additionally, extreme temperatures can also have a negative effect on your Ring device’s battery.
Camera View: You can get the best camera view possible by installing your Ring Doorbell model at the right height and angle. A poor camera view can make it challenging to identify your visitors with your smart Video Doorbell.
Privacy Concerns: Protect your privacy by ensuring that your Ring Doorbell camera’s field of view doesn’t capture any private areas or property. We understand the importance of privacy, so let’s address any concerns right away.
Wiring Issues: While battery-powered Ring Doorbells offer installation flexibility, hardwired models require proximity to a power outlet. Choosing the right position for your wired Ring Doorbell can save you the hassle (and expense) of rerouting wires.
Tips For Choosing The Perfect Ring Doorbell Position
Here are some of the things I do to choose the right position for my Ring doorbell.
Power Source: Choose Wisely
Consider the power source for your Ring device. Battery-powered models offer flexibility, while hardwired models require careful wire routing. Ensure proper connection to a power outlet.
Protect Your Ring Doorbell From the Elements
Extreme temperatures can impact battery-powered and hardwired Ring models. Heat may lead to overheating and shutdown, while cold weather can affect battery performance. Shield your device accordingly.
Optimize Camera View for Enhanced Security
Your Ring Doorbell is more than just a doorbell; it’s a smart security device. Give it the clearest view possible. Ensure the camera captures the area in front of your door effectively to maximize protection.
Install at the Right Height for Facial Recognition
Place your Ring Doorbell at a height of 48 inches from the floor. This ensures the camera captures visitors’ faces when they ring the doorbell, while also guaranteeing proper sensor functionality.
Test and Fine-Tune Your Ring Doorbell
Test your Ring Doorbell to verify its performance. Have someone ring the doorbell to check for a clear camera view and crisp audio. Effective communication with visitors is essential.
Reposition for Improved Functionality
If you experience any issues due to incorrect positioning, don’t worry. You can reposition your device for better results. Utilize the screwdriver included with your Ring Doorbell to safely move it to an optimal location.
How To Install Ring Corner and Wedge Kit?
- You have to start by positioning the angle mount exactly where you want to position the doorbell. You should also check the level, which you can quickly check using the level tool.
- Now, you have to use the provided screwdriver or a drill bit to screw the smaller screws in the top and bottom holes to mount the doorbell properly.
- If your home’s outer walls are made of concrete, stucco, or brick, you can use the provided anchor for installing the angle mount and then proceed with the positioning. If the walls are made of woods, you should not use an anchor.
- If you wish to increase the angle of the doorbell, you need to remove the screws and then place an additional amount over the first mount and use the longer screws to screw them in place.
- Now, you can attach the doorbell to the angle mount, and you can also use both the wedge and corner mount but make sure that you place the corner mount first, then the wedge mount and the doorbell above it
How To Optimize Your Ring Video Doorbell?
If you are planning on optimizing your video doorbell’s performance, you will have to be more creative and experiment with the installation of the Ring Doorbell.
You will have to test with different angles and placements before you find the perfect placement that helps your video doorbell perform better.
Installation Limitations of Ring Doorbell
There are certain limitations to the installation of the ring doorbell. The doorbells cannot be mounted horizontally and do not come with screen rotation features.
If you cannot place your video doorbell properly, you will notice that the motion sensor does not work properly, and the videos are visible sideways.
This makes it difficult for the users to check who has approached the door, plus the motion detectors might work with issues.
So, you will have to find the perfect place to mount your video doorbell for its optimum working
Installing A Battery-Operated Doorbell
These are the steps you should follow to install a battery-powered Ring doorbell, and for the optimum positioning, you can refer to the steps mentioned earlier.
You will be provided with tools that could help you with the proper placement of your Ring Doorbell.
These are some of the essential aspects you should consider if you are installing a Ring Doorbell for your home.
This will ensure that your Ring Doorbell works appropriately and also does not detect unwanted movements. You can also position the cameras properly using the tips given above and provide your home with the much-needed security.
Installation of proper doorbells and camera ensures that your home is safe and secure and you do not have to worry about your home while you are away.
Frequently Asked Questions
Where To Install Ring Doorbell?
The ring doorbell is designed in such a way that you can mount it on the door frame or the outer wall without having any issue with its performance.
Where To Put Your Ring Doorbell?
If you have a hardwired ring doorbell, you should put it on a place from where it can easily get the power and you don’t need to run a lot of wires. In case, you are using a battery operated Ring doorbell, you can place it wherever you want but make sure it is placed at a height of 1.2 metres from the ground.
Are Ring Doorbells waterproof?
The Ring Doorbells are made with weatherproof materials and can withstand temperature ranging from 0°C to 100 °C . However, there are certain extra things that you can do to protect it from water.
![Why is Ring doorbell not charging?[Fix in Seconds]](https://howtl.com/wp-content/uploads/2019/09/Ring-Doorbell-768x384.jpg)
