The Ring video doorbell revolutionized home and neighborhood security. But as is true with all technological devices, times arise when you must reset a Ring doorbell. So, it’s important to know how to do that.
The steps for how to reset the Ring doorbell are simple. You hold down a button. Look for a flashing light. Then, put it back into the setup mode. Those getting rid of a Ring doorbell should also remove it from their account.
In this article, we’re looking closely at the steps for how to reset a Ring doorbell. We’ll also touch on reasons why you’ll need to. Read on to see just how easy it is to reset your Ring!
Steps to reset Ring Doorbell – Works for All Ring Models
Step 1: Hold Down the Orange Button
You must locate the orange or black button on your Ring doorbell first. You’ll find it either on the side or the back of your device. The position and color depend on which version of the Ring doorbell you have.
Start by removing the faceplate cover of your doorbell. Use a T15 driver bit to remove the screw at the bottom of the latest version of the Ring. Some earlier models must be completely removed from the door frame.
With the plate or doorbell removed, press and hold the button for 15 to 20 seconds.
Step 2: Look for the Flashing Light
Once you see the light start flashing on your Ring doorbell, release the orange or black button. The flashing light tells you the Ring is restarting.
You may have to wait for the process to complete. It shouldn’t take longer than one minute, though. If it does take longer, start the reset over by holding the orange button again.
Step 3: Put Ring Back to Setup Mode
The latest version of the Ring completes the reset process by going straight back to setup mode. You’ll know when it’s done because the light goes off.
Older versions require a third step. You’ll need to press the orange or black button one time firmly and release it.
How to remove existing Ring Doorbell account?
If you’re getting rid of your Ring doorbell, you need to remove it from your account. Be aware, though, that when you disconnect your device from the app, you lose all the video content recorded in the app.
You may download the videos you want to keep before disconnecting the doorbell from your phone. Once you’ve done that, follow the steps below.
- Open your Ring app.
- Select the Ring doorbell you want to remove.
- Tap Settings in the top right corner.
- Tap on Remove Device.
- Confirm your selection by tapping Delete.
If you want to turn off your ring doorbell, you should go thorugh article “How To Turn Off Ring Camera?”
Reasons for Resetting a Ring Doorbell
There are a few reasons why you may need to reset a Ring doorbell. When purchasing a home from someone, the sellers may not have reset the doorbell themselves. In that case, you must do that yourself.
Sometimes our devices don’t perform the way they’re meant to because of technical issues. That can happen with your Ring doorbell.
A hard reset back to factory settings will likely resolve the problem and allow you to set up the doorbell again.
Someone might gift the Ring to you. In that case, you may need to reset it because it’s one they were getting rid of.
Similarly, you might purchase one used from someone in the neighborhood. In both cases, you’d likely have to reset them back to their factory settings.
You could also be on the other end of the exchange. When you sell your home with a Ring doorbell you’re leaving behind, you should perform a hard reset on it.
How Many Versions of Ring Doorbells Are There?
For the most part, the hard reset for all versions of the Ring doorbell is the same. How many versions are there?
As of 2021, there are four versions of Ring doorbells. They all look the same; however, the prices range from under $100 to over $200.
Some of the features vary from version to version. You can do a comparison of the various versions through the Ring support center.
You’ll find everything from what colors the faceplates come in to how wide the motion detection field spans, and more.
Final Thoughts
You may never need to hard reset your Ring doorbell. If you do, though, it’s nice to already know how to do it. It’s a simple process with a few quick steps. They’re mostly the same for all versions of the Ring doorbell.
After the reset completes, you’ll have to go through the setup mode from the beginning. Setting your doorbell up isn’t difficult either.
Everything you need to know is found on the general information page of the Ring support center. You’ll find the set up steps for every version of the Ring doorbell. As with the reset, setup is simple, too.
